Po instalacji Tornada (dłłłuugie)
Michal Kuratczyk
kurkens w polbox.com
Sob, 2 Sty 1999, 19:18:13 CET
[sobota, 02 styczeń 1999], Wojtek Slusarczyk napisał(a):
> Pokaz dokladnie jaki komunikat wywala i wypiske ze strace'a.
--------------------------------------------------------------------
[root] /root # startx
XFree86 Version 3.3.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: November 18 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.1.129 i586 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NV1, STG2000, RIVA128, RIVATNT, ET4000, ET4000W32, ET4000W32i,
ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100,
et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
gvga, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225,
sis5597, sis5598, sis6326, tvga8200lx, tvga8800cs, tvga8900b,
tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b,
tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi,
tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685,
cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975,
3dimage985, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462,
clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541,
clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e,
cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
mgag100, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301,
ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7,
ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, s3_virge,
AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160,
NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
ct64300, mediagx, V1000, V2x00, p9100, spc8110, generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3
(**) SVGA: Graphics device ID: "Generic SVGA"
(**) SVGA: Monitor ID: "Generic Monitor"
Warning: The directory "/usr/X11R6/lib/X11/fonts/local/" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) SVGA: PCI: S3 ViRGE rev 6, Memory @ 0xe0000000
(--) SVGA: S3V: ViRGE rev 6, Linear FB @ 0xe0000000
(--) SVGA: Detected S3 ViRGE
(--) SVGA: using driver for chipset "s3_virge"
(--) SVGA: videoram: 4096k
(--) SVGA: Ramdac speed: 135 MHz
(--) SVGA: Detected current MCLK value of 65.148 MHz
(--) SVGA: chipset: s3_virge
(--) SVGA: videoram: 4096k
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 135.000 MHz
(**) SVGA: Mode "640x480": mode clock = 25.175
(**) SVGA: Virtual resolution set to 800x600
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: s3_virge: Using hardware cursor
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 pattern fill
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: CPU to screen color expansion (bitmap, TE/NonTE imagetext, TE/NonTE polytext)
(--) SVGA: XAA: Using 6 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and non-transparent stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
Fatal server error:
could not open default font 'fixed'
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
X connection to :0.0 broken (explicit kill or server shutdown).
--------------------------------------------------------------------
BTW Dlaczego pisze 2.1.129 [i586]? To są dane maszyny, na której były
kompilowane? Zrekompilować będę mógł dopiero dzisiaj w nocy.
--------------------------------------------------------------------
[root] /root # strace startx
execve("/usr/X11R6/bin/startx", ["startx"], [/* 22 vars */]) = 0
personality(0 /* PER_??? */) = 0
geteuid() = 0
getuid() = 0
getegid() = 0
getgid() = 0
brk(0) = 0x80fc998
brk(0x80fd000) = 0x80fd000
SYS_175(0, 0xbffffbe0, 0xbffffb60, 0x8, 0) = 0
brk(0x80fe000) = 0x80fe000
SYS_175(0x2, 0xbffffb60, 0, 0x8, 0x2) = 0
SYS_175(0, 0xbffffbec, 0xbffffb6c, 0x8, 0) = 0
brk(0x80ff000) = 0x80ff000
SYS_175(0x2, 0xbffffb6c, 0, 0x8, 0x2) = 0
getpid() = 447
SYS_175(0, 0, 0x80fc1bc, 0x8, 0) = 0
open("/dev/tty", O_RDWR|O_NONBLOCK) = 3
close(3) = 0
SYS_175(0, 0xbffffb68, 0xbffffae8, 0x8, 0) = 0
SYS_175(0x2, 0xbffffae8, 0, 0x8, 0x2) = 0
SYS_175(0, 0xbfffbae4, 0xbfffba64, 0x8, 0) = 0
brk(0x8100000) = 0x8100000
SYS_175(0x2, 0xbfffba64, 0, 0x8, 0x2) = 0
open("/usr/share/locale/locale.alias", O_RDONLY|0x8000) = 3
fstat(3, {st_mode=0403, st_size=0, ...}) = 0
mmap(0, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40000000
read(3, "# Locale name alias data base.\n"..., 4096) = 2057
SYS_175(0, 0xbfffbac8, 0xbfffba48, 0x8, 0) = 0
brk(0x8101000) = 0x8101000
SYS_175(0x2, 0xbfffba48, 0, 0x8, 0x2) = 0
SYS_175(0, 0xbfffbad0, 0xbfffba50, 0x8, 0) = 0
brk(0x8102000) = 0x8102000
SYS_175(0x2, 0xbfffba50, 0, 0x8, 0x2) = 0
read(3, "", 4096) = 0
close(3) = 0
munmap(0x40000000, 4096) = 0
open("/usr/share/i18n/locale.alias", O_RDONLY|0x8000) = -1 ENOENT (No such file or directory)
SYS_175(0, 0xbffffa94, 0xbffffa14, 0x8, 0) = 0
SYS_175(0x2, 0xbffffa14, 0, 0x8, 0x2) = 0
SYS_175(0, 0xbffffa94, 0xbffffa14, 0x8, 0) = 0
SYS_175(0x2, 0xbffffa14, 0, 0x8, 0x2) = 0
open("/usr/share/locale/pl/LC_MESSAGES", O_RDONLY) = 3
fstat(3, {st_mode=0, st_size=0, ...}) = 0
close(3) = 0
open(ptrace: umoven: Błąd wejścia/wyjścia
0xbffffb34, O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/i18n/pl/LC_MESSAGES", O_RDONLY) = -1 ENOENT (No such file or directory)
getuid() = 0
getgid() = 0
geteuid() = 0
getegid() = 0
SYS_175(0, 0, 0x80fbbfc, 0x8, 0) = 0
time(NULL) = 915299624
SYS_174(0x11, 0xbffff9f0, 0xbffff964, 0x8, 0x11) = 0
SYS_174(0x11, 0xbffff9e8, 0xbffff95c, 0x8, 0x11) = 0
SYS_174(0x2, 0xbffff9e0, 0xbffff954, 0x8, 0x2) = 0
SYS_174(0x2, 0xbffff9d8, 0xbffff94c, 0x8, 0x2) = 0
SYS_174(0x3, 0xbffff9f0, 0xbffff964, 0x8, 0x3) = 0
SYS_174(0x3, 0xbffff9e8, 0xbffff95c, 0x8, 0x3) = 0
SYS_175(0, 0, 0x80fc240, 0x8, 0) = 0
SYS_174(0x3, 0xbffff9e0, 0xbffff954, 0x8, 0x3) = 0
uname({sys="Linux", node="apokalipsa.pl", ...}) = 0
[ciach - żadnych błędów]
stat("/root/bin/sh", 0xbffffa30) = -1 ENOENT (No such file or directory)
stat("/usr/local/bin/sh", 0xbffffa30) = -1 ENOENT (No such file or directory)
stat("/usr/local/sbin/sh", 0xbffffa30) = -1 ENOENT (No such file or directory)
[ciach - żadnych błędów]
stat("/root/.xserverrc", 0xbffffa3c) = -1 ENOENT (No such file or directory)
SYS_175(0x2, 0x80fa19c, 0, 0x8, 0x2) = 0
SYS_175(0, 0xbffff9bc, 0xbffff93c, 0x8, 0) = 0
SYS_175(0x2, 0xbffff93c, 0, 0x8, 0x2) = 0
SYS_175(0, 0xbffffa38, 0xbffff9b8, 0x8, 0) = 0
SYS_175(0x2, 0xbffff9b8, 0, 0x8, 0x2) = 0
SYS_175(0, 0, 0x80fa19c, 0x8, 0) = 0
stat("/usr/X11R6/lib/X11/xinit/xserverrc", 0xbffff9e4) = -1 ENOENT (No such file or directory)
[ciach - żadnych błędów]
stat(ptrace: umoven: Błąd wejścia/wyjścia
0x810316c, 0xbffffa5c) = -1 ENOENT (No such file or directory)
stat("/usr/local/bin/xinit", 0xbffffa5c) = -1 ENOENT (No such file or directory)
stat("/usr/local/sbin/xinit", 0xbffffa5c) = -1 ENOENT (No such file or directory)
stat(ptrace: umoven: Błąd wejścia/wyjścia
0x810316c, 0xbffffa5c) = -1 ENOENT (No such file or directory)
stat(ptrace: umoven: Błąd wejścia/wyjścia
0x810316c, 0xbffffa5c) = -1 ENOENT (No such file or directory)
stat(ptrace: umoven: Błąd wejścia/wyjścia
0x810316c, 0xbffffa5c) = -1 ENOENT (No such file or directory)
stat(ptrace: umoven: Błąd wejścia/wyjścia
0x810316c, 0xbffffa5c) = -1 ENOENT (No such file or directory)
stat("/usr/X11R6/bin/xinit", {st_mode=0, st_size=0, ...}) = 0
stat("/usr/X11R6/bin/xinit", {st_mode=0, st_size=0, ...}) = 0
SYS_175(0, 0xbffffb04, 0xbffffa84, 0x8, 0) = 0
SYS_175(0x2, 0xbffffa84, 0, 0x8, 0x2) = 0
SYS_175(0, 0xbffffb74, 0xbffffaf4, 0x8, 0) = 0
lseek(3, -12, SEEK_CUR) = 1468
fork() = 448
SYS_175(0x2, 0xbffffaf4, 0, 0x8, 0x2) = 0
SYS_175(0, 0xbffffc10, 0xbffffb90, 0x8, 0) = 0
SYS_175(0x2, 0xbffffb90, 0, 0x8, 0x2) = 0
SYS_175(0, 0xbffffc14, 0xbffffb94, 0x8, 0) = 0
SYS_174(0x2, 0xbffff984, 0xbffff8f8, 0x8, 0x2) = 0
wait4(-1,
[ciach - patrz poprzedni zrzut]
[WIFEXITED(s) && WEXITSTATUS(s) == 1], 0, NULL) = 448
SYS_175(0, 0xbffff9e8, 0xbffff968, 0x8, 0) = 0
SYS_175(0x2, 0xbffff968, 0, 0x8, 0x2) = 0
SYS_175(0, 0xbffffaf4, 0xbffffa74, 0x8, 0) = 0
SYS_175(0x2, 0xbffffa74, 0, 0x8, 0x2) = 0
SYS_175(0x2, 0xbffffb94, 0, 0x8, 0x2) = 0
--- SIGCHLD (Proces potomny zakończył pracę) ---
wait4(-1, 0xbffffa60, WNOHANG, NULL) = -1 ECHILD (No child processes)
sigreturn(Naruszenie ochrony pamięci
--------------------------------------------------------------------
Ciekawa jest ostatnia linijka...
> Mam sendmaila na 3 maszynach i roznych jajkach i chodza jak
> brzytwa... Dawaj starce + dokladnie to co mowi 'sendmail -q'
> (zakladam, ze ipv6 masz wkompilowane w jajko...)
Nie mam - i co mi pam teraz zrobi? ;) A czy jest konieczne?
--
Michał Kuratczyk
Więcej informacji o liście dyskusyjnej pld-devel-pl