PLD-doc/queue/muvo.txt

[paszczus]

Author: paszczus
Date: Fri Apr  8 22:31:38 2005
New Revision: 5745

Added:
   PLD-doc/queue/muvo.txt
Log:
- tekst do usb, bazowany na creative muvo, by migo w norwida.net

Added: PLD-doc/queue/muvo.txt
==============================================================================
--- (empty file)
+++ PLD-doc/queue/muvo.txt	Fri Apr  8 22:31:38 2005
@@ -0,0 +1,72 @@
+Instalacja Creative Muvo n200 256MB w systemie pld linux (by migo w norwida.net) [hehe zobacz jakie skomplikowane]
+
+
+1. przygotowanie systemu
+
+Idac na wygode chce maksymalnie zautomatyzowac caly proces obslugi odtwarzacza wiec uzyje hotplug'a obecnego w jadrze 2.6 (w moim wypadku bylo to 2.6.11.6-4)
+
+Zaczynamy od instalacji pakietow:
+poldek -i hotplug
+poldek -i udev
+
+caly proces powinen odbyc sie bezproblemowo
+
+2. po reboocie
+
+Po restarcie systemu w logach znajdziemy:
+[root w MigoMachine ~]# dmesg | grep usb
+..
+usbcore: registered new driver usbfs
+usbcore: registered new driver hub
+usbcore: registered new driver usbmouse
+usbcore: registered new driver hiddev
+usbcore: registered new driver usbhid
+..
+[root w MigoMachine ~]# dmesg | grep USB
+..
+USB Universal Host Controller Interface driver v2.2
+uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
+uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
+..
+[root w MigoMachine ~]# dmesg | grep hotplug
+cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
+pci_hotplug: PCI Hot Plug PCI Core version: 0.5
+
+oczywiscie to sa logi z mojego systemu i mojego sprzetu.
+
+3. konfiguracja
+
+cala konfiguracja polega na zrobieniu ew symlinka do /media/usbdisk ;) .. tak po podlaczeniu odtwarzacza w logach znajdziemy:
+
+Apr  8 20:20:47 MigoMachine kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
+Apr  8 20:20:48 MigoMachine kernel: SCSI subsystem initialized
+Apr  8 20:20:48 MigoMachine kernel: Initializing USB Mass Storage driver...
+Apr  8 20:20:48 MigoMachine kernel: scsi0 : SCSI emulation for USB Mass Storage devices
+Apr  8 20:20:48 MigoMachine kernel: usbcore: registered new driver usb-storage
+Apr  8 20:20:48 MigoMachine kernel: USB Mass Storage support registered.
+Apr  8 20:20:48 MigoMachine kernel: usb-storage: device found at 2
+Apr  8 20:20:48 MigoMachine kernel: usb-storage: waiting for device to settle before scanning
+Apr  8 20:20:53 MigoMachine kernel: Vendor: CREATIVE  Model: MuVo N200         Rev: 1102
+Apr  8 20:20:53 MigoMachine kernel: Type:   Direct-Access                      ANSI SCSI revision: 04
+Apr  8 20:20:53 MigoMachine kernel: usb-storage: device scan complete
+Apr  8 20:20:53 MigoMachine scsi.agent[6869]: disk at /devices/pci0000:00/0000:00:11.2/usb1/1-2/1-2:1.0/host0/target0:0:0
+/0:0:0:0
+Apr  8 20:20:53 MigoMachine kernel: SCSI device sda: 504576 512-byte hdwr sectors (258 MB)
+Apr  8 20:20:53 MigoMachine kernel: sda: assuming Write Enabled
+Apr  8 20:20:53 MigoMachine kernel: sda: assuming drive cache: write through
+Apr  8 20:20:53 MigoMachine kernel: SCSI device sda: 504576 512-byte hdwr sectors (258 MB)
+Apr  8 20:20:53 MigoMachine kernel: sda: assuming Write Enabled
+Apr  8 20:20:53 MigoMachine kernel: sda: assuming drive cache: write through
+Apr  8 20:20:53 MigoMachine kernel: /dev/scsi/host0/bus0/target0/lun0: p1
+Apr  8 20:20:53 MigoMachine kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
+Apr  8 20:20:53 MigoMachine udev[6895]: configured rule in '/etc/udev/rules.d/50-udev.rules[14]' applied, 'sda' becomes '
+%k'
+Apr  8 20:20:53 MigoMachine udev[6895]: creating device node '/dev/sda'
+Apr  8 20:20:53 MigoMachine udev[6909]: configured rule in '/etc/udev/rules.d/50-udev.rules[14]' applied, 'sda1' becomes
+'%k'
+Apr  8 20:20:53 MigoMachine udev[6909]: creating device node '/dev/sda1'
+Apr  8 20:20:54 MigoMachine fstab-sync[6913]: added mount point /media/usbdisk for /dev/sda1
+Apr  8 20:20:55 MigoMachine kernel: FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be cas
+e sensitive!
+
+odtwarzacz zamountowany i gotowy do pracy z systemem.