PLD-doc/queue/muvo.txt

[Marcin Doliński]

On Friday 08 of April 2005 22:31, paszczus wrote:
> Author: paszczus
> Date: Fri Apr  8 22:31:38 2005
> New Revision: 5745
>
> Added:
>    PLD-doc/queue/muvo.txt
> Log:
> - tekst do usb, bazowany na creative muvo, by migo w norwida.net
>
> Added: PLD-doc/queue/muvo.txt
> ===========================================================================
>=== --- (empty file)
> +++ PLD-doc/queue/muvo.txt	Fri Apr  8 22:31:38 2005
> @@ -0,0 +1,72 @@
> +Instalacja Creative Muvo n200 256MB w systemie pld linux (by
> migo w norwida.net) [hehe zobacz jakie skomplikowane] +
> +
> +1. przygotowanie systemu
> +
> +Idac na wygode chce maksymalnie zautomatyzowac caly proces obslugi
> odtwarzacza wiec uzyje hotplug'a obecnego w jadrze 2.6 (w moim wypadku bylo
> to 2.6.11.6-4) +
> +Zaczynamy od instalacji pakietow:
> +poldek -i hotplug
Poniżej piszesz o hotplug-pci? Jeśli nawet to niepolecam.

> +poldek -i udev
A po co?

> +
> +caly proces powinen odbyc sie bezproblemowo
> +
> +2. po reboocie
Też nie trzeba.

> +
> +Po restarcie systemu w logach znajdziemy:
> +[root w MigoMachine ~]# dmesg | grep usb
# dmesg | grep usb

> +..
> +usbcore: registered new driver usbfs
> +usbcore: registered new driver hub
> +usbcore: registered new driver usbmouse
> +usbcore: registered new driver hiddev
> +usbcore: registered new driver usbhid
> +..
> +[root w MigoMachine ~]# dmesg | grep USB
> +..
> +USB Universal Host Controller Interface driver v2.2
> +uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller +uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus
> number 1 +..
> +[root w MigoMachine ~]# dmesg | grep hotplug
> +cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
> +pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> +
> +oczywiscie to sa logi z mojego systemu i mojego sprzetu.
Bez takich sugestii.

> +
> +3. konfiguracja
> +
> +cala konfiguracja polega na zrobieniu ew symlinka do /media/usbdisk ;) ..
> tak po podlaczeniu odtwarzacza w logach znajdziemy: +
> +Apr  8 20:20:47 MigoMachine kernel: usb 1-2: new full speed USB device
> using uhci_hcd and address 2 +Apr  8 20:20:48 MigoMachine kernel: SCSI
> subsystem initialized
> +Apr  8 20:20:48 MigoMachine kernel: Initializing USB Mass Storage
> driver... +Apr  8 20:20:48 MigoMachine kernel: scsi0 : SCSI emulation for
> USB Mass Storage devices +Apr  8 20:20:48 MigoMachine kernel: usbcore:
> registered new driver usb-storage +Apr  8 20:20:48 MigoMachine kernel: USB
> Mass Storage support registered. +Apr  8 20:20:48 MigoMachine kernel:
> usb-storage: device found at 2 +Apr  8 20:20:48 MigoMachine kernel:
> usb-storage: waiting for device to settle before scanning +Apr  8 20:20:53
> MigoMachine kernel: Vendor: CREATIVE  Model: MuVo N200         Rev: 1102
> +Apr  8 20:20:53 MigoMachine kernel: Type:   Direct-Access                 
>     ANSI SCSI revision: 04 +Apr  8 20:20:53 MigoMachine kernel:
> usb-storage: device scan complete +Apr  8 20:20:53 MigoMachine
> scsi.agent[6869]: disk at
> /devices/pci0000:00/0000:00:11.2/usb1/1-2/1-2:1.0/host0/target0:0:0
> +/0:0:0:0
> +Apr  8 20:20:53 MigoMachine kernel: SCSI device sda: 504576 512-byte hdwr
> sectors (258 MB) +Apr  8 20:20:53 MigoMachine kernel: sda: assuming Write
> Enabled
> +Apr  8 20:20:53 MigoMachine kernel: sda: assuming drive cache: write
> through +Apr  8 20:20:53 MigoMachine kernel: SCSI device sda: 504576
> 512-byte hdwr sectors (258 MB) +Apr  8 20:20:53 MigoMachine kernel: sda:
> assuming Write Enabled
> +Apr  8 20:20:53 MigoMachine kernel: sda: assuming drive cache: write
> through +Apr  8 20:20:53 MigoMachine kernel:
> /dev/scsi/host0/bus0/target0/lun0: p1 +Apr  8 20:20:53 MigoMachine kernel:
> Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 +Apr  8
> 20:20:53 MigoMachine udev[6895]: configured rule in
> '/etc/udev/rules.d/50-udev.rules[14]' applied, 'sda' becomes ' +%k'
> +Apr  8 20:20:53 MigoMachine udev[6895]: creating device node '/dev/sda'
> +Apr  8 20:20:53 MigoMachine udev[6909]: configured rule in
> '/etc/udev/rules.d/50-udev.rules[14]' applied, 'sda1' becomes +'%k'
> +Apr  8 20:20:53 MigoMachine udev[6909]: creating device node '/dev/sda1'
> +Apr  8 20:20:54 MigoMachine fstab-sync[6913]: added mount point
> /media/usbdisk for /dev/sda1 +Apr  8 20:20:55 MigoMachine kernel: FAT: utf8
> is not a recommended IO charset for FAT filesystems, filesystem will be cas
> +e sensitive!
Nie floodować.

> +
> +odtwarzacz zamountowany i gotowy do pracy z systemem.