Płyta MSI-865P NEO - UDMA ??? [długie]

Adam Jurkiewicz a.jurkiewicz w herc.com.pl
Sob, 29 Lis 2003, 23:06:55 CET


Szanowni koledzy i koleżanki :-)
Mam sobie płytę jak w temacie i dysk 40 GB.
Robię sobie hdparm -d1 /dev/hdb i dupa.
Czy ktoś z czymś takim walczył ? Jakieś sugestie .. każda (poza zmianą płyty 
głównej) mile widziana :-)

hdparm -d1 /dev/hdb

/dev/hdb:
 setting using_dma to 1 (on)
 using_dma    =  0 (off)
 HDIO_SET_DMA failed: Operation not permitted
 ^^^^^^^^^^^^^^^^^^^^ nigdy wcześniej nie miałem czegoś takiego, 
ale nie uzywałem tej płyty głównej.

BARDZO ciekawy komunikat w dmesg'u znalazłem :
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide0: Speed warnings UDMA 3/4/5 is not functional.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^


/dev/hdb:
 multcount    = 16 (on)
 IO_support   =  1 (32-bit)
 unmaskirq    =  1 (on)
 using_dma    =  0 (off)
 keepsettings =  0 (off)
 readonly     =  0 (off)
 readahead    =  8 (on)
 geometry     = 77545/16/63, sectors = 78165360, start = 0


hdparm -I /dev/hdb daje nam :
ATA device, with non-removable media
	Model Number:       ST340810A                               
	Serial Number:      5FB8ZCET            
	Firmware Revision:  3.99    
Standards:
	Supported: 6 5 4 3 
	Likely used: 6
Configuration:
	Logical		max	current
	cylinders	16383	4047
	heads		16	16
	sectors/track	63	255
	--
	CHS current addressable sectors:   16511760
	LBA    user addressable sectors:   78165360
	device size with M = 1024*1024:       38166 MBytes
	device size with M = 1000*1000:       40020 MBytes (40 GB)
Capabilities:
	LBA, IORDY(can be disabled)
	bytes avail on r/w long: 4	Queue depth: 1
	Standby timer values: spec'd by Standard
	R/W multiple sector transfer: Max = 16	Current = 16
	Advanced power management level: unknown setting (0x0040)
	Recommended acoustic management value: 128, current value: 128
	DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 
	     Cycle time: min=120ns recommended=120ns
	PIO: pio0 pio1 pio2 pio3 pio4 
	     Cycle time: no flow control=240ns  IORDY flow control=120ns
Commands/features:
	Enabled	Supported:
	   *	READ BUFFER cmd
	   *	WRITE BUFFER cmd
	   *	Host Protected Area feature set
	   *	Look-ahead
	   *	Write cache
	   *	Power Management feature set
		Security Mode feature set
	   *	SMART feature set
	   *	Device Configuration Overlay feature set 
	   *	Automatic Acoustic Management feature set 
		SET MAX security extension
	   *	Advanced Power Management feature set
	   *	DOWNLOAD MICROCODE cmd
	   *	SMART self-test 
	   *	SMART error logging 
Security: 
	Master password revision code = 65534
		supported
	not	enabled
	not	locked
	not	frozen
	not	expired: security count
	not	supported: enhanced erase
HW reset results:
	CBLID- above Vih
	Device num = 1 determined by the jumper
Checksum: correct

==================================================
lspci -v :

00:00.0 Host bridge: Intel Corp.: Unknown device 2570 (rev 02)
	Flags: bus master, fast devsel, latency 0
	Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [e4] #09 [a106]
	Capabilities: [a0] AGP version 3.0

00:01.0 PCI bridge: Intel Corp.: Unknown device 2571 (rev 02) (prog-if 00 
[Normal decode])
	Flags: bus master, 66Mhz, fast devsel, latency 32
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	Memory behind bridge: fd900000-fe9fffff
	Prefetchable memory behind bridge: f3f00000-f7efffff

00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 02) (prog-if 00 
[UHCI])
	Subsystem: Intel Corp.: Unknown device 24d0
	Flags: bus master, medium devsel, latency 0, IRQ 16
	I/O ports at e400 [size=32]

00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02) (prog-if 00 
[UHCI])
	Subsystem: Intel Corp.: Unknown device 24d0
	Flags: bus master, medium devsel, latency 0, IRQ 19
	I/O ports at e800 [size=32]

00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 02) (prog-if 00 
[UHCI])
	Subsystem: Intel Corp.: Unknown device 24d0
	Flags: bus master, medium devsel, latency 0, IRQ 18
	I/O ports at ec00 [size=32]

00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 02) 
(prog-if 20 [EHCI])
	Subsystem: Intel Corp.: Unknown device 24d0
	Flags: bus master, medium devsel, latency 0, IRQ 23
	Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
	Capabilities: [58] #0a [2080]

00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 82) (prog-if 00 
[Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fea00000-feafffff

00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 02)
	Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 02) (prog-if 8a 
[Master SecP PriP])
	Subsystem: Intel Corp.: Unknown device 24d0
	Flags: bus master, medium devsel, latency 0, IRQ 18
	I/O ports at <unassigned>
	I/O ports at <unassigned>
	I/O ports at <unassigned>
	I/O ports at <unassigned>
	I/O ports at fc00 [size=16]
	Memory at 20000000 (32-bit, non-prefetchable) [disabled] [size=1K]

00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 02)
	Subsystem: Intel Corp.: Unknown device 24d0
	Flags: medium devsel, IRQ 17
	I/O ports at 0c00 [size=32]

01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 03) 
(prog-if 00 [VGA])
	Subsystem: Matrox Graphics, Inc. Millennium G400 32Mb SGRAM
	Flags: bus master, medium devsel, latency 32, IRQ 16
	Memory at f4000000 (32-bit, prefetchable) [size=32M]
	Memory at fe9fc000 (32-bit, non-prefetchable) [size=16K]
	Memory at fe000000 (32-bit, non-prefetchable) [size=8M]
	Expansion ROM at fe9e0000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 2
	Capabilities: [f0] AGP version 2.0

02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)
	Subsystem: Surecom Technology EP-320X-R
	Flags: bus master, medium devsel, latency 32, IRQ 18
	I/O ports at d800 [size=256]
	Memory at feafef00 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2

02:04.0 SCSI storage controller: Adaptec AHA-2940/2940W / AIC-7871 (rev 03)
	Flags: bus master, medium devsel, latency 32, IRQ 16
	I/O ports at dc00 [disabled] [size=256]
	Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at feae0000 [disabled] [size=64K]

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 15
model		: 2
model name	: Intel(R) Pentium(R) 4 CPU 2.60GHz
stepping	: 9
cpu MHz		: 2600.140
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat 
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips	: 5190.45


-- 
Adam Jurkiewicz : Inżynier Serwisu Linux  
HERC : Linuxowe Systemy Sprzeday Detalicznej
[ http://www.linux.herc.com.pl ]
Numer Gadu-Gadu : 302315   



Więcej informacji o liście dyskusyjnej pld-users-pl