Skaner

[Jarosław Kamper]

Dnia pią 17. października 2003 01:14, Krystian T napisał:
> Witam
> Próbuję uruchomić skaner Plustek OpticPro 9636T i coś mi to nie
> wychodzi
>
> :(
>
> Czy ktoś mógłby mi pomóc?
>
> [root w tom /]# modprobe -v pt_drv
> # pre-install pt_drv:
> modprobe -k parport
> /sbin/insmod /lib/modules/2.4.20-9smp/misc/pt_drv.o.gz lampoff=180
> warmup=15 port=0x378 lOffonEnd=0 mov=0 slowIO=1 forceMode=2
> Using /lib/modules/2.4.20-9smp/misc/pt_drv.o.gz
> Symbol version prefix 'smp_'
> /lib/modules/2.4.20-9smp/misc/pt_drv.o.gz: init_module: Success
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters.
>       You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.20-9smp/misc/pt_drv.o.gz: insmod
> /lib/modules/2.4.20-9smp/misc/pt_drv.o.gz failed
> /lib/modules/2.4.20-9smp/misc/pt_drv.o.gz: insmod pt_drv failed

[jack w pldworkstation jack]$ sudo modprobe -v pt_drv
/sbin/insmod /lib/modules/2.4.20-8_nogrsec/misc/pt_drv.o.gz lampoff=300 
warmup=60 port=0x378 lOffonEnd=1 mov=0 slowIO=0 forceMode=0
Using /lib/modules/2.4.20-8_nogrsec/misc/pt_drv.o.gz
Symbol version prefix ''
/lib/modules/2.4.20-8_nogrsec/misc/pt_drv.o.gz: init_module: Success
Hint: insmod errors can be caused by incorrect module parameters, 
including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-8_nogrsec/misc/pt_drv.o.gz: insmod 
/lib/modules/2.4.20-8_nogrsec/misc/pt_drv.o.gz failed
/lib/modules/2.4.20-8_nogrsec/misc/pt_drv.o.gz: insmod pt_drv failed

Z sysloga:

Oct 20 21:03:54 pldworkstation pt_drv : driver version 0.42-10
Oct 20 21:03:54 pldworkstation parport0: PC-style at 0x378 (0x778) 
[PCSPP,TRISTATE]
Oct 20 21:03:54 pldworkstation parport0: irq 7 detected
Oct 20 21:03:54 pldworkstation pt_drv : no device(s) detected, (-9020)
Oct 20 21:04:25 pldworkstation pt_drv : driver version 0.42-10

A tu po włożeniu wtyczki skanera do zasilania ;)

[jack w pldworkstation jack]$ sudo modprobe -v pt_drv
/sbin/insmod /lib/modules/2.4.20-8_nogrsec/misc/pt_drv.o.gz lampoff=300 
warmup=60 port=0x378 lOffonEnd=1 mov=0 slowIO=0 forceMode=0
Using /lib/modules/2.4.20-8_nogrsec/misc/pt_drv.o.gz
Symbol version prefix ''

Z sysloga:

Oct 20 21:05:05 pldworkstation pt_drv0: 9636T/12000T found on port 0x0378
Oct 20 21:05:05 pldworkstation pt_drv0: Lamp-Timer set to 300 seconds.
Oct 20 21:05:05 pldworkstation pt_drv0: WarmUp period set to 60 seconds.
Oct 20 21:05:05 pldworkstation pt_drv0: Lamp switch-off on driver unload.


W modules.conf:

alias char-major-40 pt_drv
options  pt_drv  lampoff=300  warmup=60  port=0x378  lOffonEnd=1 mov=0 
slowIO=0 forceMode=0

> Tu jest fragment z syslog:
>
> Oct 17 00:49:24 tom kernel: devfs_mk_dir(scanner): using old entry in
> dir: c161d540 ""
> Oct 17 00:49:24 tom kernel: pt_drv : driver version 0.42-10
> Oct 17 00:49:24 tom kernel: parport0: PC-style at 0x378 (0x778)
> [PCSPP,TRISTATE,EPP]
> Oct 17 00:49:24 tom kernel: parport0: irq 7 detected
> Oct 17 00:49:24 tom kernel: pt_drv : no device(s) detected, (-9020)
>
> A tu zainstalowane pakiety:
>
> sane-frontends-1.0.11-4
> sane-backends-1.0.12-1
> sane-backends-plustek-1.0.12-1
> kernel-smp-char-plustek-0.45.5-1 w 2.4.20_9
> kernel-2.4.20-9

[jack w pldworkstation jack]$ rpm -qa|grep "sane\|plustek"
sane-backends-1.0.12-1
kernel-char-plustek-0.45.5-1 w 2.4.20_8_nogrsec
sane-frontends-1.0.8-2
sane-backends-plustek-1.0.12-1
sane-backends-devel-1.0.12-1

A, gdzieś w międzyczasie popełniłem:

sudo mknod /dev/pt_drv c 40 01

bo mam devfs, który mi łądnie czyści /dev :)

-- 
Jarosław Kamper <jack w jack.eu.org> http://jack.eu.org/